JadeMonkeyStudios

Henna Applicator Bottles and Tips

Better Barrier Performance Solutions for PET Bottle Preform

Nowadays, PET bottle has found its wide applications in beverage, dairy, pharmaceuticals and chemistry, etc. This mainly relies on the development of its barrier performance development. In order to achieve better barrier performance, the research and control of PET bottle preform barrier property is a must. At present, the following four techniques are commonly applied so as to improve the barrier property of PET PET bottle preform barrier property. 1. PET Bottle Preform Barrier Property Solution: Multi-layer Multi-layer method is also defined as complex injection method. Inject PET backings, and then, inject barrier material through hot mold core to form central barrier layer. This method requires high skills of the operator and strict quality control. 2. PET Bottle Preform Barrier Property Solution: Raw Material Blending Input barrier material directly into the PET raw materials, which is favorable for standard bottle preform process systematically with the prepared materials. This method requires no other processing measures, and requires little of the operator. However, the blended barrier material would reduce the transparency of the PET bottles and result in turbidity. 3. PET Bottle Preform Barrier Property Solution: Coating Coating is to plasma coat on the inner and outer sides of the molded bottle preform, this processing is usually quite complicated. 4. PET Bottle Preform Barrier Property Solution: Multi-molding This method starts from the interior molding, and makes multi-layer molding during equal processing period. Multi-molding method is quite complicated since it requires every layer to be very thin; however, in actual application, mold core may be deviated by the pressure differences and failed to realize even thickness. Besides, when the first molding period finishes, the bottle preform has to be transmitted to another molding chamber for further molding. This process is accomplished through rotation, and would easily lead to peel of layers. This problem has been resolved by some companies: when changing molding chamber, several lines of mold cores moves in the parallel way which replaces the rotation and avoids layer peeling. The above-mentioned progress and applications on PET bottle preform barrier performances and technologies have paved the way for carrying out of various barrier performance solutions. High barrier performance is closely linked to barrier performance testing. When testing the barrier performances of PET packages and PET bottle preforms, Oxygen Permeability Rate Tester is a useful tool. Labthink introduces Labthink PERME OX2/230 Oxygen Transmission Rate Test System for PET bottle and PET bottle preform barrier property testing. Oxygen transmission rate (OTR) is the most common testing for barrier property testing of PET bottle and PET bottle preform. ASTM F1307, GB/T 19789 and other equal pressure testing methods are applicable. Isolate the transmission chamber with the pre-conditioned specimen to form two separated gas flow system: the testing gas flows outside the PET bottle or the bottle preform (testing gas can be pure oxygen, or the gas mixture with oxygen); high pure carrying gas flows inside the bottle or bottle preform. Though the two sides are of the same pressure, the oxygen partial pressures are different. Due to the oxygen concentration differences, oxygen transmits through the package, and is carried to the sensor which would bring forward accurate oxygen quantity in the carrier gas flow so as to calculate oxygen transmission rate. Labthink PERME OX2/230 Oxygen Transmission Rate Test System can provide thorough oxygen testing means for barrier property of PET bottle and PET bottle preform. Besides, this instrument is of master-satellite mode, a master preform can support nine satellite modules; thus, 30 specimens can be tested at the same time. Its testing accuracy and technology have both achieved world advanced standard. About Labthink: Labthink, the excellent provider of testing instruments and testing services, is devoted to provide most excellent and complete quality control solutions for pharmaceutical, foodstuff, cosmetics, packaging, printing, adhesive, automotive, petrochemistry, environment, biology, new energy, construction, aviation and electronic industries worldwide. Labthink Instruments Co., Ltd. Mark Won Secretary@labthink.cn Tel: +86 (0)531 85864214-8058 Fax: +86 (0)531 85812140 www.labthink.cn

About the Author

Labthink, the excellent provider of testing instruments and testing services, is devoted to provide most excellent and complete quality control solutions for pharmaceutical, foodstuff, cosmetics, packaging, printing, adhesive, automotive, petrochemistry, environment, biology, new energy, construction, aviation and electronic industries worldwide.

The seam sealer on my tent is turning milky white in the rain. Is that OK?

Hi
I set up my new Eureka tent and applied seam sealer (the kind in the little bottle with the fuzzy applicator tip) to most of the seams. A day later it rains and the stuff is thick and white. Will it go clear again when it dries? Is this normal?
Thanks

I also learned this the hard way, as Steve said the sealer is supposed to go on the inside but also, as I found out as I was reading the package in the morning rain while staring at my new “Ugly” tent, most applications require 72 hours of drying time to ensure proper curing before being exposed to any moisture. Oh well, hard lesson but the tent is still pretty dry, just not real pretty. There’s a couple brands now that dry quicker, The ” Sil-net” and the “Polycoat” will both dry within 24 hours…………………….